Racco Brasil - Proteção Respiratória - Abrasi-Blast™ Supplied-Air

Abrasi-Blast Respirators are air-line devices with tight-fitting facepieces and durable hoods that provide respiratory and upper body protection for workers engaged in abrasive blasting. Because blasting operations can vary widely in the shipbuilding,construction and utility industries,among others, the Abrasi-Blast Respirator can be modified through selection of different components or models to meet specific applications.

For example, the respirator is available in pressure-demand and constant-flow models, both of which can accommodate protective headwear worn under the hood.

The pressure-demand version is a Type CE device that is approved for lead concentrations less than 100,000 µg/m3,based on the Occupational Safety and Health Administration’s (OSHA) Lead Exposure in Construction Standard.The constant-flow model is a Type CE device as well and provides protection in abrasive blasting operations with lower contaminant levels (airborne lead concentrations less than 2,500 µg/m3).

Consisting of a hood,facepiece with lens housing,breathing tube,lens cartridge,flowcontrol device,air-supply hose and support belt, the Abrasi-Blast Respirator can be designed for diverse applications by varying individual components.

Users can build their own Abrasi-Blast Respirators to fit specialized needs by selecting components that best suit specific applications.Components to choose from and their points of differentiation are:

1a.Pressure Demand- Users must first choose between the pressure-demand and constant-flow models.The pressure-demand version,which uses a
65-85 psig regulator,is approved by the National Institute for Occupational Safety and Health (NIOSH) for use in environments with high contaminant levels (More than 2,500 µg/m3 of lead).Users must choose one of nine different Quick-Disconnect fittings for attaching the air hose to the pressuredemand regulator.

1b.Flow-Control Device/Fittings-The constantflow model is approved for use in atmospheres not immediately dangerous to life or health and operates through one of three flow-control devices:adjustable, non-adjustable or a vortex tube. These versions incorporate the Quick-disconnect
fitting with the flow-control device.

Adjustable Control-Valve Connectorsfeature a control knob that allows the wearer to vary air flow within NIOSH-required flow rates (4 cfm minimum
to 15 cfm maximum).The connectors are designed to deliver air at a fixed inlet pressure regardless of the approved hose length used.(Low-pressure adjustable valve-connectors require an inlet pressure between 10 and 15 psig with an approved hose length of 8 to 50 feet.High-pressure adjustable valve-connectors require an inlet pressure between 35 and 40 psig with an approved hose length of 8 to 300 feet.)

Non-adjustable Control-Valve Connectorsare available in both low-pressure and high-pressure versions and deliver the required airflow to the facepiece at a fixed inlet pressure regardless of the approved hose length used.(Inlet pressure and hose length comparable to adjustable valve requirements shown above.)

Vortex Tube is a direct-flow high-pressure device which cools as well as regulates the flow of incoming air.The wearer can adjust the temperature of the air with a throttling valve at the end of the tube.The Vortex Tube is available as cool-only or warm-cool.

Cool-only Vortex require an inlet pressure between 60 to 80 psi with an approved hose length of 8 to 300 ft.

The Warm-Cool Vortex has an approved hose length of 8 to 300 ft.and the inlet pressure is based on the length of hose used.See chart below.

Constant Flow Duo-Flo Option-The Abrasi-Blast Respirator is also available in a constant flow duo-flo configuration.This configuration is designed to handle both air-supplied and air-purifying modes of operation. Air-supplied mode of operation provides a continuous flow of air into the facepiece,and enables the user to work for long periods of time in contaminated atmospheres,without depleting the cartridge or canister.Air-purifying mode of operation can be used for continuous use or when air supply is disconnected or not available.If the air supply should ever fail,the user is automatically protected by the air-purifying cartridge/canister and can conveniently escape the contaminated area.

2.Lens Cartridge-The cover lens cartridge assembly is an exclusive MSA design,allowing for lens changes without stopping work. Each removable lens,except the last one,has tabs which are pulled to remove the cover lens as it becomes abraded.The last lens has no pull tabs because it protects the polycarbonate lens of the facepiece. Used lenses are stored in the pocket on the front of the hood.
Five different types of lens cartridges are available to match different blasting levels.
• For light abrasive blasting,MSA offers cartridges containing four 0.06-inch-thick glass lenses.Users can also choose regular glass or tempered lenses, which provide extra protection against breakage.
• For medium abrasive blasting,MSA offers cartridges containing three 0.09-inch-thick glass lenses.Users may select tempered or untempered lenses.
• For heavy abrasive blasting,cartridges containing two or three 0.12-inch-thick glass-laminated lenses are available.

3.Hood-Different hoods are available to meet different blasting needs:
• A Hypalon hood is available in both waist- and shoulder-length styles for general-purpose blasting.
• A lighter-weight duck cloth hood is available in waist- and chest-length styles to provide greater comfort during general-purpose blasting.

• Neoprene hoods in waist- and shoulder-length styles are available for close-in,heavy blasting operations.
• A fourth hood available is a Hypalon-Front,knitback hood for use with blasting suits.This hood is only offered in shoulder-length.

4.Facepiece-The Abrasi-Blast Respirator utilizes a tight-fitting,full-face Ultravue® facepiece in concert with the cover lens housing assembly. Constant-flow models feature a choice of dual (standard) or single exhalation valves.The pressuredemand version features a regulator-type springloaded exhalation valve. Facepieces are black and available in your choice of silicone or Hycar rubber in small,medium and large sizes.

5.Breathing Tube-The blow-molded breathing tube,which can be worn inside or outside of the hood,is available in standard and reinforced models. A breathing tube with muffler is also available for use with the Vortex Tube systems.

6.Air-Supply Hose-Three types of MSA Air- Supply Hose are available in lengths of 8,15,25,50 and 100 feet. Neoprene is the most durable/chemical-resistant type of hose.Polyvinyl chloride (PVC) is the most lightweight.Coiled nylon expands or contracts according to need. MSA Air-Supply Hoses must be used to maintain NIOSH/MSHA approvals on the Abrasi-Blast Respirator.

7.Belt- Two support belts are available:a standard web belt and a urethane belt that is easier to decontaminate.

The Abrasi-Blast Respirator has the following NIOSH/MSHA approvals:
• Approval TC-19C-161 for Abrasi-Blast Respirator when used with 8 to 50 ft. of MSA Air-Supply Hose at an inlet pressure of 10 to 15 psig.
• Approval TC-19C-162 for Abrasi-Blast Respirator when used with 8 to 300 ft. of MSA Air-Supply Hose at an inlet pressure of 35 to 40 psig.
• Approval TC-19C-178 (cool only) for Abrasi-Blast Respirator with vortex tubes.
• Approval TC-19C-236 for Abrasi-Blast Pressure- Demand Respirator.
• Duo Flow Abrasi Blast - see NIOSH Approved Matrix,PN 818148

INFORMAÇÕES, AQUISIÇÕES E COTAÇÕES.

RACCO BRASIL
Av. Barbacena, 58 - 30190-130 - Belo Horizonte - MG - Brasil
Fone: (31) 3029.1477 Fax: (31) 3029.1488
www.racconet.com.br - E-mail: vendas@racconet.com.br


	Components


	Users can build their own Abrasi-Blast Respirators to fit specialized needs by selecting components that best suit specific applications.Components to choose from and their points of differentiation are:
	1a.Pressure Demand- Users must first choose between the pressure-demand and constant-flow models.The pressure-demand version,which uses a 65-85 psig regulator,is approved by the National Institute for Occupational Safety and Health (NIOSH) for use in environments with high contaminant levels (More than 2,500 µg/m3 of lead).Users must choose one of nine different Quick-Disconnect fittings for attaching the air hose to the pressuredemand regulator. 1b.Flow-Control Device/Fittings-The constantflow model is approved for use in atmospheres not immediately dangerous to life or health and operates through one of three flow-control devices:adjustable, non-adjustable or a vortex tube. These versions incorporate the Quick-disconnect fitting with the flow-control device. Adjustable Control-Valve Connectorsfeature a control knob that allows the wearer to vary air flow within NIOSH-required flow rates (4 cfm minimum to 15 cfm maximum).The connectors are designed to deliver air at a fixed inlet pressure regardless of the approved hose length used.(Low-pressure adjustable valve-connectors require an inlet pressure between 10 and 15 psig with an approved hose length of 8 to 50 feet.High-pressure adjustable valve-connectors require an inlet pressure between 35 and 40 psig with an approved hose length of 8 to 300 feet.) Non-adjustable Control-Valve Connectorsare available in both low-pressure and high-pressure versions and deliver the required airflow to the facepiece at a fixed inlet pressure regardless of the approved hose length used.(Inlet pressure and hose length comparable to adjustable valve requirements shown above.) Vortex Tube is a direct-flow high-pressure device which cools as well as regulates the flow of incoming air.The wearer can adjust the temperature of the air with a throttling valve at the end of the tube.The Vortex Tube is available as cool-only or warm-cool. Cool-only Vortex require an inlet pressure between 60 to 80 psi with an approved hose length of 8 to 300 ft. The Warm-Cool Vortex has an approved hose length of 8 to 300 ft.and the inlet pressure is based on the length of hose used.See chart below.



	Constant Flow Duo-Flo Option-The Abrasi-Blast Respirator is also available in a constant flow duo-flo configuration.This configuration is designed to handle both air-supplied and air-purifying modes of operation. Air-supplied mode of operation provides a continuous flow of air into the facepiece,and enables the user to work for long periods of time in contaminated atmospheres,without depleting the cartridge or canister.Air-purifying mode of operation can be used for continuous use or when air supply is disconnected or not available.If the air supply should ever fail,the user is automatically protected by the air-purifying cartridge/canister and can conveniently escape the contaminated area. 2.Lens Cartridge-The cover lens cartridge assembly is an exclusive MSA design,allowing for lens changes without stopping work. Each removable lens,except the last one,has tabs which are pulled to remove the cover lens as it becomes abraded.The last lens has no pull tabs because it protects the polycarbonate lens of the facepiece. Used lenses are stored in the pocket on the front of the hood. Five different types of lens cartridges are available to match different blasting levels. • For light abrasive blasting,MSA offers cartridges containing four 0.06-inch-thick glass lenses.Users can also choose regular glass or tempered lenses, which provide extra protection against breakage. • For medium abrasive blasting,MSA offers cartridges containing three 0.09-inch-thick glass lenses.Users may select tempered or untempered lenses. • For heavy abrasive blasting,cartridges containing two or three 0.12-inch-thick glass-laminated lenses are available. 3.Hood-Different hoods are available to meet different blasting needs: • A Hypalon hood is available in both waist- and shoulder-length styles for general-purpose blasting. • A lighter-weight duck cloth hood is available in waist- and chest-length styles to provide greater comfort during general-purpose blasting. • Neoprene hoods in waist- and shoulder-length styles are available for close-in,heavy blasting operations. • A fourth hood available is a Hypalon-Front,knitback hood for use with blasting suits.This hood is only offered in shoulder-length. 4.Facepiece-The Abrasi-Blast Respirator utilizes a tight-fitting,full-face Ultravue® facepiece in concert with the cover lens housing assembly. Constant-flow models feature a choice of dual (standard) or single exhalation valves.The pressuredemand version features a regulator-type springloaded exhalation valve. Facepieces are black and available in your choice of silicone or Hycar rubber in small,medium and large sizes. 5.Breathing Tube-The blow-molded breathing tube,which can be worn inside or outside of the hood,is available in standard and reinforced models. A breathing tube with muffler is also available for use with the Vortex Tube systems. 6.Air-Supply Hose-Three types of MSA Air- Supply Hose are available in lengths of 8,15,25,50 and 100 feet. Neoprene is the most durable/chemical-resistant type of hose.Polyvinyl chloride (PVC) is the most lightweight.Coiled nylon expands or contracts according to need. MSA Air-Supply Hoses must be used to maintain NIOSH/MSHA approvals on the Abrasi-Blast Respirator. 7.Belt- Two support belts are available:a standard web belt and a urethane belt that is easier to decontaminate.

	Aprovações


	The Abrasi-Blast Respirator has the following NIOSH/MSHA approvals: • Approval TC-19C-161 for Abrasi-Blast Respirator when used with 8 to 50 ft. of MSA Air-Supply Hose at an inlet pressure of 10 to 15 psig. • Approval TC-19C-162 for Abrasi-Blast Respirator when used with 8 to 300 ft. of MSA Air-Supply Hose at an inlet pressure of 35 to 40 psig. • Approval TC-19C-178 (cool only) for Abrasi-Blast Respirator with vortex tubes. • Approval TC-19C-236 for Abrasi-Blast Pressure- Demand Respirator. • Duo Flow Abrasi Blast - see NIOSH Approved Matrix,PN 818148

	INFORMAÇÕES PARA PEDIDO

	Consulte-nos sobre este produto
INFORMAÇÕES, AQUISIÇÕES E COTAÇÕES. RACCO BRASIL Av. Barbacena, 58 - 30190-130 - Belo Horizonte - MG - Brasil Fone: (31) 3029.1477 Fax: (31) 3029.1488 www.racconet.com.br - E-mail: vendas@racconet.com.br